We have many installations in the Czech Republic
DryPol® 50m
8171 satisfied customers in 7 countries
- Contactless drying and insulation
- Buildings up to 30 m x 30 m (900 m2)
- 15-years free servicing
- Price 1693 EUR incl. VAT
- TIP: Do you want to dry a smaller object? Check out the DryPol® 30m product, which is slightly cheaper.
Michal Macháč
Expert in drying buildings and author of a technical solutionDo you have a question about the Drypol® system or a service?
Ask anything
1
It dries and insulates
Drypol first gets rid of the moisture. It will then insulate your entire house from it. Permanently.
2
No dust and dirt
Drypol just needs to be plugged into a socket. No demolition, no construction. And life in the house goes on as before.
3
10 years free servicing
We will make sure that your Drypol works reliably and lasts longer than your own car.
4
Get a lot even with a low investment
Drypol is the most powerful device on the market, while its annual consumption is cheaper than charging two phones.
5
A fair price
We are the affordable and long-term cheapest renovation solution for every household.
6
Harmless to health
Drypol emits signals similar to a radio, so it cannot harm or hurt anyone or anything in the house.
7
References speak for us
Drypol and its results are verified by hundreds of satisfied clients from houses that have already been dehumidified.
The DryPol® system is truly affordable
The device price/value ratio is more than favourable. The device installation price is not even a fraction of that of other technologies like undercutting and its mutations, including chemical grouting.
The prices are final and include both device installation and professional moisture measurement in your building, labour and transport.
DryPol® system measuring is fast
15-year warranty for the DryPol® system
The DryPol® system warranty certificate gives you a 15-year guarantee of free device servicing from the date of purchase in the event of a fault in the device at any time during this period.
The manufacturer guarantees free device servicing for the duration of the DryPol® warranty.
NOTE: Please note that before you install the device yourself, it is first necessary to determine the cause of masonry dampness. If the natural physical phenomenon known as capillary moisture causes dampness in your building, then the DryPol® masonry moisture remover will be effective. However, if the walls are damp due to other effects, typically pressure water or rainwater drainage, DryPol® will not work.
Price of DryPol® 50m
Device installation by the customer
For buildings up to 900 m2
- max. 30 m x 30 m (side x side)
TIP: Do you want to dry a smaller object? Check out the DryPol® 30m product, which is slightly cheaper.
- DryPol system + accessories
- available in white and black
- transport cost will be calculated additionally
- A 15-year guarantee of free service
Installing the DryPol® system is not complicated - you can do it yourself and save money.
The warranty is the same - 10 years free service.
The warranty is the same - 10 years free service.
If you purchase a DryPol® system with self-installation (customer installation), a technician visit is no longer available! The self-installation price is reduced by subtracting the cost of the technician’s visit, professional measurement of the building, and transport.
Comparison between electroosmosis and other
insulation methods
Chemical injection
- suitable for small local cases
- construction work on the building required
- high price
- addresses moisture issues only where it is applied
- no construction work on the building
- affordable
- removes dampness throughout the building
- less suitable for small, localised cases (e.g. a damp corner)
Undercutting with a saw
- suitable with complete reconstruction
- construction work on the building required
- high price
- addresses moisture issues only where it is applied
FAQ about Drypol®
Where is the DryPol® masonry dryer installed?
The DryPol® masonry drying device is always installed in the centre of the building to ensure its range (30 m or 50 m depending on type) covers all parts and corners of the building.
Where the building is “L” shaped, we install the electro-physical masonry dryer in the corner of the building.
If other buildings on the customer’s land are within range of the DryPol® masonry dryer, these can also be dried and permanently insulated as long as the device is installed in a suitable location. The effect of the DryPol® masonry dryer works on all masonry with proper foundations, which also means the bases of fences within range of the device.
If the building has a basement, we install the masonry drying device in the centre of the basement. If there is only a smaller cellar, we install the masonry drying device in the centre of the ground floor as soil is an insulator and the signal generated by the masonry dryer will not penetrate through it.
Is the Drypol® system expensive?
If you own a damp building, meaning if your building is affected by capillary rising damp and you want to dry the masonry and resolve the problem, you only have three basic options:
- Remove the moisture by undercutting
- Remove the rising damp using chemical grouting
- Dry the damp masonry with subsequent permanent electronic waterproofing of the building using an electro-physical method
Let’s take a look at these techniques for removing moisture from the walls of a building purely from the price perspective. We are not saying that 1.694 EUR to 1.815 EUR for a DryPol® system is small change, but compare the approximate prices yourself:
- Undercutting a building affected by damp: undercutting a whole building, including interior walls, costs on average CZK 150 000 or more.
- Chemical grouting in the walls: chemical grouting for a whole building, including interior walls, costs around CZK 100 000 or more.
- The DryPol® system: without any construction work in the building, meaning without any significant structural interventions, you get a dry ground floor including the interior walls, upper floors, flooring, cellars, flooring in the cellars, and reduced moisture levels in the foundations, savings on heating bills and reduced radon in the air in the building. All this for a final price of between 1.694 EUR and 1.815 EUR incl. VAT and the related services.
The DryPol® system guarantees significantly increased comfort because the building will be dry. It is also clear that when a property needs to be sold, the selling price for a dry building is much higher and it will be much easier to attract buyers.
8171 satisfied customers in 7 countries
Take a look at our references
Dehumidification and drying of the church of St. Markets
Parish of Loděnice near Moravské Krumlov with the church of St. Margaret. Excellent results of drying and permanent insulation of the rectory building in Loděnice near Moravské Krumlov.
DryPol® 50m
More
Reviews and experiences of clients with the Drypol® system
(unabridged - in the original version)
Hello, since August 22, 2022 I have been using your device for drying wet masonry - DryPol 50 m - device number M 6381 - according to contract no. 2022/XXX (installed by technician Ivan Douša, Mgr.).
The equipment is used for a 28 m x 23 m building in Polní Chrčice. It is an ""L"" shaped village building with a barn. The front part is a house, 7 m wide x 18 m long and directly connected to the barn with the stable. It is 23 m wide x 10 m deep. The device is located in the barn, on the wall of the last living room. I think everything is optimal. With your equipment, the humidity of the masonry has been reduced and the plaster does not fall off, we are satisfied. Nevertheless, there are places where the humidity is still annoying. We would also like to ""prevent"" this and that is why I am writing to you. I am interested in purchasing another device and possibly moving the current device to another location. With the existing device, you guarantee a range of 50 m, I understand that sometimes calculations and practice can be a little different. Please let me know if this reasoning is correct. Thank you and have a nice day.
After 4 years since the installation of 2 Drypol® 50m devices, I can confirm that the removal of moisture from the masonry in the basement was successful. The exposed bricks in the basement are now beautifully dry. And yet, when the DryPol® system was installed in 2021, the walls were very wet. All SVJ members are satisfied.
Hello, on March 6, 2025, your employee Mr. Douša was at my place for a consultation and then for the installation of the DryPol device. I would like to praise him very much for his excellent attitude towards me as a customer. He was very helpful and accommodating. Based on this experience, I will also recommend your company to my friends. My best regards Vlasta Bambasová
Experts in their place. They will advise and recommend. The proposed solution works. Those who don't try it won't believe it. We can recommend this company.
We have installed Drypol equipment on the municipal building for about 5 years. We have already tested whether the dehumidification works.
We are very satisfied.
Hello, today Mr. Douša was with us and installed the Drypol device for us, it was an excellent approach and a very professional lecture about the device and test boreholes for measuring humidity. It was all at a high level and professionalism. I praise and thank Mr. Douša. Karel Koucky.
Thank you Mr. Douša for your professional approach, polite behavior, excellent explanation of the device's function.
We believe that our problem will be solved. We have only had it for a few days now.
Jasněna Janoušková for SVJ Nádražní 282. Nový Bor
Dear all, your DryPol machine works and works well! The cooperation with Mr. Novotny before, during and after the installation was excellent, thank you! Have a nice day and be healthy!
