We have many installations in the Czech Republic
We dehumidify the basement of an apartment building in Prague.
The combination of two DryPol® 30m devices on one building is the right solution for starting the drying of large basement spaces.
| Year: | 2025 |
|---|---|
| City: | Praha |
| Region: | Capital city of Prague |
| Country: | Czech Republic |
| Client type: | Private person |
| Building type: | Apartment house |
Michal Macháč
Expert in drying buildings and author of a technical solutionDo you have a question about the Drypol® system or a service?
Ask anythingIt is a basement under an apartment building. It is a whole cellar of 20x20 meters, which has several rooms and a wide range of uses. One part is used for skateboarding, another part has billiards, table tennis, a kitchen, a workshop, a warehouse and other rooms. And everything is 4 meters below ground level. There is little ventilation, there is mold, salt on the surface of the walls and wetness everywhere. The easiest way to deal with rising moisture in the masonry and finally, after other futile attempts, to start drying the masonry, is to use our DryPol® 30m moisture removal device. And because the owner wanted to be sure that drying began to take effect as soon as possible, on our recommendation and at his express request, we installed 2 of our DryPol® devices with fine wireless electroosmosis.
FREE professional consultation and moisture measuring in your house or cellar
Would you like to know whether the mould or other problems in your house are actually being caused by damp masonry? Are you wondering how to dry the damp masonry in the most gentle and permanent way? Our technicians provide free professional consultation throughout the Czech and Slovak Republics. Based on the results we can then propose the best solution using the DryPol® system and, if you want, install the system immediately on site with a discount. We contractually guarantee reduced moisture levels in your property. Make a non-binding order for free professional assessment of moisture in your home today.
Our other services – thermal scanning of buildings
In addition to the remediation of damp masonry, we also offer thermal scanning that can reveal dangerous faults, areas with heat leaks and condensation points. You can find more information here.
We helped with the product
DryPol® 30m
For buildings up to 400 m² max. 20 m x 20 m (side x side)
We helped with the product
DryPol® 30m
For buildings up to 400 m² max. 20 m x 20 m (side x side)
8325 satisfied customers in 7 countries
Take a look at our references
Dehumidification and drying of the church of St. Markets
Parish of Loděnice near Moravské Krumlov with the church of St. Margaret. Excellent results of drying and permanent insulation of the rectory building in Loděnice near Moravské Krumlov. More >
Insulation of the lock against rising moisture
Isolation of the castle in Lomnice nad Popelkou More >
Reviews and experiences of clients with the Drypol® system
Experts in their place. They will advise and recommend. The proposed solution works. Those who don't try it won't believe it. We can recommend this company.
Hello, today Mr. Douša was with us and installed the Drypol device for us, it was an excellent approach and a very professional lecture about the device and test boreholes for measuring humidity. It was all at a high level and professionalism. I praise and thank Mr. Douša. Karel Koucky.
Hello, our experience with the DryPol system has been very good. We were a little skeptical at first, but after installation and commissioning we changed our minds. The house started to dry out and not just by feel. First the smell of damp disappeared, later the plaster also dried out. Mr. Douša, who installed the system for us, explained everything to us, including later questions.We were completely convinced of the functionality of the system by the subsequent control measurements. We recommend the product and are convinced of its functionality. I would like to point out that this is an old house, without insulation, proper foundations and walls made of stone and wattle and daub.
Pavel Runt
Hello. I was looking for a way to dehumidify an old family house. I found a Drypol moisture removal device that was supposed to work wirelessly. Mr. Michal Douša came, explained everything, did some test drilling, recorded the values from the damp masonry, and installed the device. After three years, I had the masonry retested, and the measured values were much lower and therefore within tolerance. About a year and a half after installing the device, I also had the house completely dug up.
Tomáš Jančula
SMS: Three years after the installation of the device for drying the masonry, we asked to measure the humidity in the walls. In some places in the house, we had doubts that the device was working. After a careful measurement, which was carried out by Mr. Michal Douša, we were convinced that everything was in order. He again willingly explained everything to us. Thank you very much. Spouses Jedlan, Břežany II.
Comparison between electroosmosis and other
insulation methods
Chemical injection
- suitable for small local cases
- construction work on the building required
- high price
- addresses moisture issues only where it is applied
- no construction work on the building
- affordable
- removes dampness throughout the building
- less suitable for small, localised cases (e.g. a damp corner)
Undercutting with a saw
- suitable with complete reconstruction
- construction work on the building required
- high price
- addresses moisture issues only where it is applied
